COMMAND PROMPT NETWORK COMMANDS

 COMMAND PROMPT COMMANDS FOR COMPUTER NETWORKS

Here are the commands in the Command Prompt related to computer networks.

To perform these commands you must enter the Command Prompt,

 (Click Start -> Run-> Type CMD)
1. ipconfig / all
Displays the connection configuration information, such as Host Name, Primary DNSType, Ethernet LAN Adapter.

2. ipconfig / flushdns
Remove the DNS Cache.

3. ipconfig / release
"Removing" all IP Address connections.

4. ipconfig / renew
Create a new IP address for a particular adapter.

5. ipconfig / displaydns
Displays the DNS Cache.

6. ipconfig / registerdns
To refresh the DNS and re-register the DNS connection.

7. ipconfig / showclassid
Displays the DHCP class information.

8. ipconfig / setclassid
Change the DHCP Class ID
9. control netconnections
Displays the Network Connection.

10. nslookup
Know the ip address address of the domain name in the write.

11. netstat
Displays information connect TCP / IP is currently active.

12. route
Displays the local route.

13. hostname
Displays the name of the computer.

14. ping
Example: ping www.finderonly.com
Do a test connection to the site www.finderonly.com.
The less% of his loss, the better the connection.

15. tracert
Displays IP Address route.


Hopefully SUCCESS... 

Description : COMMAND PROMPT NETWORK COMMANDS
URL : http://indra-combination.blogspot.com/2012/03/command-prompt-commands-for-computer.html
Permalink : COMMAND PROMPT NETWORK COMMANDS